Internet of Things and its Applications (M4-R5.1) – NIELIT O Level

1) _________ are the characteristics of IOT

2) End to end connection is established by…protocol of the TCP/IP suite?

3) Which Layer of OSI Model is referred as Heart of the OSI model

4) What will be the output of the following piece of code?

#include 
int main() 
{
	int i;
	for(i=0;i< 8; i++);
		printf("%d",i);
	return 0;
}

5) Arduino uno have ____ size of program memory

6) Transmission media are usually categorized as

7) When speaking to business associates or customers, always open the conversation to questions and_________.

9) The main function of transport layer is

10) Which of the following helps to collaborate in loT development?

11) A microprocessor work using digit(s)

12) Which of the following is an example of Embedded memory microcontroller?

13) The term bot comes from robot. An internet bot may also known as

14) MQTT stands for :

15) Which type of cable has glass center core

16) Which law restricts corporate communications for publicly traded companies before and during the peirod that new securities are being registered?

17) When speaking to business associates or customers, always open the conversation to questions and .....?

18) Identity the challenge coming under securing the information.

19) In What of Pin, DHT sensor should be connected?

20) Actuators can be

21) Which of following is/are suggested time management technique(s)?

22) Self-esteem comes from all of the following except..

23) A digit value is converted to an analogue signal using which of the following Methods?

24) The initiation, maintenance, and termination of the physical connection of a network take place at which layer of OSI Model

25) Router operate at layer of OSI reference model ?

26) What is the use of the IR Sensor?

27) A device which converts electrical energy into mechanical energy is:

28) Dictionary attacks is a kind of

29) How many analog pins are used in Arduino Mega board

30) The actuators used in IoT applications are?

31) MBTI Theory is related with the ____

32) How MDM will achive locking mechanism ?

33) The OSI layer that arranges signals into logical units of information called frames:

34) _________ consists of two different metals connected at two points.

35) How Many layers are present in OSI Model

36) Which of the following is not a main element of IoT

37) The frequency of Wi-Fi is between

38) Which protocol is a Network layer protocol

39) Functions can pass information in which of the following ways ?

40) Expand IDE full form________?

41) Arduino is called written with IDE Programe?

42) Personality is an individual aspect of culture, whereas________is a collective aspect of personality.

43) New device ID Should be a globally unique identifier

44) Personality is :

45) Which statement(s) are true about a brute force attack

46) Tagging Things

47) How many times does the setup() function run on every startup of the Arduino System ?

49) Which of the following is NOT a hard skill?

51) Which one is not a core component of IoT

52) Zigbee is alternative to which technology

53) The component that are parent on a typical Microcontroller IC are

54) The founder of Arduino project is ______

55) Personality is:

56) Characteristic(s) of microprocessors

57) In which of these, more than one candidate is interviewed?

59) Closed loop control also known as

60) What will be the output of the following Arduino code?

#define X 10;
void setup()
{
	X=0;
	Serial.begin(9600);
	Serial.print(X);
}
void loop()
{
	//Do nothing…
}

61) Which command used to print message on second line in LCD?

62) In Which from data transferred in network layer?

63) What will be the output of the following code?

int main()
{
int i=25;
int k=i%4;
print("%d\n",k);
}

64) Sensors can be

65) .............means being specific, definite and vivid?

66) ___Layer can be divided into the data access network and the core network.

67) Which of the following is used to upload the Arduino Sketches to the board

68) Elements of Self Esteem are:

69) Which sensors measure the moisture level using humidity?

70) What is the effect of performing AND operation of R with 0xFE ?

71) Which of the following is a function of a sensor?

72) Which of the following is a good password example.

73) Synchronization and error check perform at which layer of OSI Model

74) What is the out come of the following Arduino code?

void setup(){

Serial.begin(9600);

}

void setup0{

Serial.write(20);

}

75) ARM stands for -

76) What is pipe lining?

77) What will be the output of the following code snippet?

d={3,4,5}
for k in d:
print(k)

78) How Many layers are present in OSI Model

79) The Setup() defines ..

80) The device connected to the internet of things have to communicate automatically, not via humans. What is this called

81) The whole concept of achieving success begins with how you:

82) Characteristic(s) of microprocessors

83) All code in an Arduino sketch iss processed from___.

84) is heart of Computer system

85) Analog pins _____ the signals from an analog sensor.

86) Which one is not the feature of M2M?

87) Without _______ Arduino cannot be run.

88) Fragmentation and reassembly of data packets take place which layer of OSI model

89) A good presenter and communicator should

90) ______ is a function which starts after power-up or reset.

91) Which layer of OSI model Act as the network controller

92) Self-esteem reflects a person's subjective. evaluation of his or her own worth.

93) Microcontroller is the brain of IOT devices.

94) Which statement is true in concern with Request-response IoT communication model?

95) ___________considers personality as a certain style which is peculiar to the individual and is determined by the characteristic organization of mental trends, complexes, emotions and sentiments.

96) Major Component of loT is/are

97) Which parameter is taken through pulseln() in ultrasonic sensor?

98) The main objective of WoT (Web of Things) is

99) What is the java extension file used in IoT?

100) What is the frequency of Bluetooth?